WORLD WIDE DISTRIBUTOR OF PRINTING MATERIALS SINCE 1997

---

Generally, Quick-Dry Printing means UV printing.
However, Quick-Dry printing by oil based inks can be achieved by maximum drawing out the potential of the machine and inks. And Quick-Dry Printing can save the working time and the cost - can make the board insert unnecessary, can save the waste papers and the ink consumption, etc..

In many printing factories, the dampening water is being oversupplied to solve various troubles such as the dirt on the plate. Such oversupplied dampening water deteriorates the roller condition, and the following negative spiral is caused habitually.

　　 　 　 　 　　

The potential of the machine cannot be drawn out enough in such a condition.

Quick-Dry Printing is possible by the reset of the machine, the daily maintenance of it, and by high performance Fountain Solution.
Quick-Dry Printing brings you the following positive spiral, and as the result the operator is liberated from various problems.

　　　　　　

Our SUPER FOUNT 200S series and Maintenance Materials make supreme Quick-Dry Printing possible.

---

The dampening water can be reduced by the initializing and maintenance of the machine. But to reduce more dampening water and to realize true Quick-Dry Printing, the Fountain Solution with higher water supply efficiency should be necessary.

The emulsification buffered Fountain Solution "SUPER FOUNT 200S" can perfectly correspond to the Quick-Dry Printing.

---

In the machine components, the rollers deteriorate earliest and influence the printing quality most.

The ink resin which attached to the rollers cannot be washed away completely by the normal solvent washing and deposits on the roller surface. It causes the glazing which prevents ink flow.

The initializing of the rollers by dairy maintenance and proper nip adjustment should be indispensable method to the Quick-Dry Printing, and can postpone the life of rollers drastically.

Our roller maintenance products can perfectly support you.

---

The easy printing can prevent the dirt on the plate by supplying sufficient water onto the plate .

However, Quick-Dry Printing can be achieved by returning to the primary printing theory - to squeeze the water and ink.
The ink washing is automatic, the dampening water is changed when it becomes dirty, rollers are changed for new ones ones a year, --- you think these should be the maintenance, don't you?

The dairy maintenance just for 10-15 minutes brings you Quick-Dry Printing, and it frees you from the operation of the ink pot.
Let's get Quick-Dry Printing - every printed matter can be dried within 3 minutes - by dairy maintenance.

---

Cost reduction and productivity, quality improvement
　＊Consumption reduction of the ink and fountain solution -- Drastic cost reduction
　＊Reduction of the warming up time ---------------- Reduction of loss time and waste papers
　＊Solution of the blocking and dirt ------------------ Stable quality and reduction of the printing loss
　＊Solution of the inverse trapping ----------------- Reduction of the ink loss and improvement of the printing quality
　＊High speed printing -------------------------- Improvement of the productivity
　＊No need of the spacing boards --------------- Labor saving
　＊Saving of the drying time and space -------- Shortening of the delivery time and effective utilization of the space
　＊FA by CIP3 ------------------------------------ Stable printing quality
　＊Extension of the rollers life ------------------- Cost reduction

Quick-Dry Printing can ---
　Shorten the shift time to a process after the printing.
　Reduce the tack of the ink by squeezing the water and as a result the speedup of the press is enabled.

　Control the emulsification of the ink and prevent the dry down.

　Decrease the waste of the papers by CIP3.

　Reduce the ink consumption about 20-30%.

---

---